Gateway 920 User Manual page 11

Component
Power connector
Mouse port
Keyboard port
USB ports
Serial port
Parallel port
Monitor port
LAN jack
Card retention cover
thumbscrew
Release latches
Microsoft Certificate
of Authenticity
Shipping
thumbscrew
Kensington lock slot
System label
Card retention cover
Description
Plug the power cord into this connector.
Plug a PS/2 (Personal System/2
Plug a PS/2 keyboard into this port.
Plug USB devices into these ports.
Plug a serial device into this port.
Plug a parallel device into this port.
Plug a monitor into this port.
Plug an Ethernet RJ-45 cable into this jack.
Remove this thumbscrew to release the card retention
cover, and install this thumbscrew to secure the cover.
Push these latches apart to release and remove the side
panel.
Contains your Windows product key.
Remove this thumbscrew to open the side panel. This
thumbscrew secures the side panel during shipment.
Connect a Kensington cable lock to this slot to prevent
the server case from being opened.
Includes your server's model and serial number.
Pull this cover out to release expansion cards, and press
it in to secure the cards.
www.gateway.com
®
) mouse into this port.
Back
5