Gateway 920 User Manual page 43

Option
Supervisor password
User password
4
Type the password and press E
5
Exit the BIOS Setup utility.
For information about bypassing BIOS passwords, see
passwords" on page
Monitoring case access
Whenever the server's case cover is removed, the intrusion switch is activated
and an event is recorded in the event log.
To view the event log:
1
Restart your server, then press F2 when the Gateway logo screen appears
during startup. The BIOS Setup utility opens.
2
Open the
. The event log is shown on the screen.
Log Area
Description
To control access to system configuration, set a
supervisor password. Using a supervisor password lets
you make changes to any setting in the BIOS.
Passwords can be temporarily disabled. To bypass the
passwords, see
page 77.
To control access to the server, set a user password. The
supervisor can set the level of access granted to the user
password. The user password access levels are:
No Access. User cannot access the BIOS Setup utility.
■
Limited. User can change only the date and time.
■
View Only. User can see all settings, but cannot
■
change them.
Full. User can change every setting except the
■
supervisor password.
Passwords can be temporarily disabled. To bypass the
passwords, see
page 77.
77.
menu, select
Advanced
www.gateway.com
"Bypassing the BIOS passwords" on
"Bypassing the BIOS passwords" on
, then type it again and press E
NTER
"Bypassing the BIOS
Event Log Configuration
System administration
.
NTER
, then select
Event
37