Film Drive Roller Cleaning Routine - HID FARGO HDP 6600 Maintenance Manual

Powering
Trusted Identities

2.3 Film drive roller cleaning routine

Video link: https://player.vimeo.com/video/679261839
The following diagram shows the location of the film drive roller.
1. Open the printer front door and slide out the film drawer.
2. Remove the film material.
3. Slide in the film drawer and close the front door.
4. Using the onscreen options, navigate to the Toolbox and select Cln Flm Roller.
5. Prepare an adhesive cleaning card by removing the paper backing.
6. Press the Start Cleaning button to start the film drive roller movement.
7. Hold the adhesive cleaning card with the adhesive backing paper removed up to the drive roller to clean it.
Repeat this a few times with different sections of the cleaning card until there is no debris left on the roller.
8. Discard the cleaning card as it is a one-time use item.
9. Re-install the film material.
10. Slide in the film drawer and close the front door.
PLT-06394, A.0 9
HID® FARGO® HDP®6600
Recommended Maintenance
February 2022