Processing Messages - Furuno NX-700A Operator's Manual

2.11

Processing Messages

Choosing messages to display
You can choose which category of messages to display: All, Alarm, User
Selected and Good messages.
1. With the message list or detailed message shown, press the LIST key to
show the list options.
2. Press ▲ or ▼ to choose the item.
All Messages: Shows all messages received.
Alarm Messages: Shows only SAR/WARNING messages.
User Selected Messages: Shows messages arranged at User Select Station &
Msg on NAVTEX menu.
Good Messages: Shows messages whose error rate is less than 4%.
3. Press the ENT key to close the window.
The list chosen at step 2 appears.
Note: When the following messages appear, set the List window to All Messages
to show.
Urgent message:
"Message not chosen for display received; it is a int'l (or local) 00 message.
Choose "All Message" (LIST menu) to display."
Normal message:
Int'l (or local) message not chosen for display received. Choose "All
Message" (LIST menu) to display."
All Messages
Alarm Messages
User Messages
Good Messages
Lock Message
List options
2. OPERATION
2-9