Other Functions - Furuno NX-700A Operator's Manual

2.16

Other Functions

This paragraph describes the various options which allow you to set up your unit
to suit your needs.
NAVTEX menu
Item
Receive
Mode
Local
Channel
Auto Print
Rcv Station &
Msg
User Select
Station &
Msg
System menu
Item
Warn Msg Alm
Signal Monitor
Key Beep
Time Offset
Units
Printer
Description
Chooses the receiving mode. (See
paragraph 2.6.)
Chooses the local channel.
Chooses the message to print
automatically. (See paragraph 2.12.)
Receives messages in the category.
Sets the station and type of message to
be shown on the SELECT MESSAGES
display.
Description
Turns the audible alarm on/off when receiving a
Warning message (A, B, and L).
Turns the audible alarm for monitoring of Rx
signal on/off.
Off: Disables monitoring.
Int'l: Monitors international frequency.
Local: Monitors local frequency.
Turns key beep on/off.
If a GPS receiver feeds nav data to the NAVTEX,
you may use local time instead of UTC time.
Enter the time difference between local time and
UTC time.
Chooses units of measurement (distance and
ship speed) to be shown on the User Display.
Sets the printer type. (See paragraph 4.6.)
2. OPERATION
Setting
INS, Auto, Manual
490kHz, 4209.5kHz
Off, All, User Select
-
-
Setting
On, Off
Off, Int'l, Local
On, Off
-13:30 to
+13:30
nm, kt,
km, km/h,
mi, mi/h
None,
NX-700A,
Upright,
Inverted
2-17