Operation; Operating Controls - Furuno NX-700A Operator's Manual

2.

OPERATION

2.1

Operating Controls

2.2 Turning the Unit On/Off
Press the
the start up display, where the ROM and RAM are checked for proper operation
and the program no. is displayed. The results of the check are shown as OK or
NG (No Good).
When the results are OK, the list display is shown after five seconds after
completion of the check, with frequency last used before turning the power off.
Registers items on menus.
MENU
ENT
LIST
DIM
PRINT
Adjusts the panel and LCD dimmer.
+: Raises the setting.
- : Decreases the setting.
Display unit, front view
key to turn the unit on. A beep sounds and the equipment shows
DUAL CHANNEL NAVTEX
NX-700
FURUNO ELECTRIC CO., LTD.
ROM : OK RAM : OK
Program No. 0850193-XX
Cursor pad
-Shifts the cursor and display.
-Selects items on menus.
Opens menu/Returns to the previous display.
ESC
Opens the LIST options.
Opens the PRINT options.
Turns the power on/off.
XX: Program version No.
2-1