Furuno NX-700A Operator's Manual page 31

Printing each message
1. Press ▲ or ▼ to choose the desired message from the list.
2. Press the ENT key to show the detailed information.
3. Press the PRINT key.
4. Press ▲or ▼ to choose "Print" from the window.
5. Press the ENT key to print.
Printing messages automatically
When receiving a message, it can be printed out immediately.
1. Press the MENU/ESC key to open the main menu.
2. Press ▲ or ▼ to choose NAVTEX, and then press the ENT key to show the
NAVTEX menu.
3. Press ▲ or ▼ to choose Auto Print, and then press the ENT key to open the
auto print options.
4. Press ▲ or ▼ to choose All, User Select or Off as appropriate.
All: Prints all messages when receiving.
User Select: Prints only the specified messages at User Select Station & Msg
on the NAVTEX menu when receving.
Off: All messages are not printed automatically.
5. Press the ENT key.
6. Pres the MENU/ESC key several times to close the menu.
Canceling printing
When a menu is displayed, you cannot cancel the printing.
1. Press the PRINT key while showing the messages to open the print window.
2. Press ▼ to choose "Cancel Print" and then press the ENT key.
Off
All
User Select
Auto print options
2. OPERATION
2-11