Replacement Of Fuse, Battery, Lcd And Thermal Paper - Furuno NX-700A Operator's Manual

Navtex receiver
Hide thumbs Also See for NX-700A:
Table of Contents

Advertisement

3. MAINTENANCE & TROUBLESHOOTING
3.2
Replacement of Fuse, Battery and Thermal
Paper
Fuse
The fuse inside the receiver unit protects the equipment from overcurrent or
reverse polarity. If the fuse blows, contact your dealer about replacement.
Battery
A battery is installed inside the display unit, and it preserves data when the
power is turned off. The life of the battery is about 5-10 years, and its voltage is
checked when the power is turned on. When its voltage is low, the BATTERY
(
) icon appears on the display to alert you. When this happens, contact your
dealer to request replacement of the battery.
Note: When the battery is dead, all default settings are restored.
LCD Display
The life of the LCD is approx. 20,000 hour. When the LCD has expired, the
brilliance cannot be raised.
3-2
Name
Type
Fuse
FGMB 2A 125V
Use the proper fuse.
Use of a wrong fuse can result in damage
to the equipment or cause fire.
Name
Type
BATT
CR2450-F2ST2L 000-144-941
Ensure battery polarity is correct.
Wrong polarity may cause the batteries to
explode.
Code No.
000-103-165
WARNING
Code No.
WARNING

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx-700bNx-700a

Table of Contents