Error Messages And Alerts - Furuno FELCOM19 Inmarsat Mini-C MES Operator's Manual

alphanumeric data entry window appears depending on your selection. For exam-
ple, the window at right shows the options for [Word Wrap].
4. Press the ↑ or ↓ key to select an option desired and press the Enter key.
5. Long-press the Esc key to return to the standby display.
Note 1: On some menus the [Update] window appears after you press
the Esc key. This is done to ask you to confirm settings. [Yes] is select-
ed; press the Enter key to register settings, or press [→] to select [No]
and press the Enter key to escape. If invalid data is entered, an appli-
cable error message appears and the previous setting is restored.
Note 2: The following functions are not available:
Keying sequence
F3-1
F8-1
F8-4
Note 3: In the [System Setup] menu, the message "Wait..." appears while a process
is being executed. The message disappears when the process is completed.
Note 4: To return to the standby display at any time (except the message preparation
screen), long-press the Esc key.
2.5

Error Messages and Alerts

The terminal unit displays error messages and alerts, in the CAUTION window, to call
your attention to mis-operation, failed operation and system error. A list of error mes-
sages appears in section 8.7 and alerts appear in the Appendix 2.
To erase an error message or alert, press the Esc key.
No. Message File
No Message.
Item
Selection of priority on transmit message
[NAV PORT], [LAN PORT], [MESSAGE OUTPUT PORT],
[EGC OUTPUT PORT], [NETWORK SETUP] (parts of) on
[System Setup] menu
Waypoint on [EGC Setup] menu
Wait...
Sent Message
Destination
CAUTION
<Press ESC key to continue>
2. OPERATIONAL OVERVIEW
LES Priority Send Status
Update
Yes No
Delivery
2-11