Serial I/O On Module; Trusted Platform Module (Tpm); Sema Board Controller; Debug Headers - ADLINK Technology Express-SL User Manual

2.7

Serial I/O on Module

Chipset: Nuvoton NCT5104D
Ports: 2x UARTs Rx/Tx only
Console Redirection: COM 1 or COM 2 selectable in BIOS
COM Port Description
COM 1 Supported by module (SER0, A98/A99), via NCT5104D
COM 2 Supported by module (SER1, A101/A102), via NCT5104D
COM 3 Supported by Super I/O (W83627DHG) on carrier board
COM 4 Supported by Super I/O (W83627DHG) on carrier board
2.8

Trusted Platform Module (TPM)

•
Chipset: Atmel AT97SC3204
•
Type: TPM 1.2
2.9

SEMA Board Controller

Type: ADLINK Smart Embedded Management Agent (SEMA)
Supports:
•
Voltage/Current monitoring
•
Power sequence debug support
•
AT/ATX mode control
•
Logistics and Forensic information
•
Flat Panel Control
•
General Purpose I2C
•
Failsafe BIOS (dual BIOS )
•
Watchdog Timer and Fan Control
2.10

Debug Headers

40-pin multipurpose flat cable connector, used in combination with DB-40 debug module providing BIOS POST code LED, BMC access,
SPI BIOS flashing, power testpoints, debug LEDs
60-pin XDP header for ICE debug of CPU/chipset
IRQ Address
7 0x240
5 0x248
4 0x3F8
3 0x2F8
11
Express-SL/SLE
Console Redirection Support
Yes
Yes
Yes
Yes