Performing The Low Contrast Test (For Other Countries) - Siemens SOMATOM Spirit Operator's Manual

Quality Assurance
Preparing the phantom
04/2012
Performing the low contrast test
(for other countries)
F . 4
(1) Water phantom
(2) Slice thickness phantom
(3) Wire phantom
(4) Low contrast phantom
Attach the low-contrast phantom section to the Siemens
✧
phantom combination, using the mounting bracket and
four mounting screws.
Mount the phantom assembly on the patient table at nor-
✧
mal body height.
Move the patient table into the gantry until the scan center
✧
is aligned with the center of the low contrast phantom.
Low Contrast Test (Optional)
F . 4
F . 4
0 . 0
F.4-7
0 . 0
0 . 0