Siemens SOMATOM Spirit Operator's Manual page 98

Software Related Safety Information
A.4-14
Curved cuts
If you want to view subareas that cannot be obtained by planar,
i.e. flat images, you can draw in a cut line with any curvature
freehand. You can then display this cut as an image in the out-
put segment. The orientation mark and the cutline are displayed
as orientation aids.
CAUTION
Using non-planar slice images for diagnostic purposes!
Wrong diagnosis.
A . 4
Be careful when interpreting orientation labels. Keep the
✧
shape of the curved cut and its orientation in the volume in
mind.
Safety
A . 4
A . 4
A . 4
A . 4
A . 4
A . 4
0 . 0
SOMATOM Spirit
0 . 0
0 . 0