Support Of Postscript Printers - Siemens SOMATOM Spirit Operator's Manual

System Description
04/2012

Support of postscript printers

A Siemens CT system is a medical device where under no cir-
cumstances other software than the released syngo CT software
may be installed. This also applies to printer drivers for post-
script printers.
Your software includes the generic Adobe Postscript Driver. With
this generic printer driver, different postscript printers can be
connected to a Siemens CT system without the need of install-
ing any specific printer driver for the individual printer.
Siemens only allows the connection of a postscript printer via a
TCP/IP network port or locally at the parallel interface. Con-
nected postscript printers shall be used primarily for printing the
reports that are created in the different applications available on
the system. Postscript Printers might also be used to print med-
ical images. These printouts are not for diagnostic use.
Console
B . 5
B . 5
B . 5
B . 5
0 . 0
B.5-19
0 . 0
0 . 0