Prepare To Install The Oven; Power Connection; Cabinet Mount - Samsung NV75N7677RS User & Installation Manual

Installation

Prepare to install the oven

Phillips Screwdriver

Power connection

L N
01 02 03
01 BROWN or BLACK
02 BLUE or WHITE
03 YELLOW and GREEN
Rated current (A)
10 < A ≤ 16
16 < A ≤ 25
Check the output specifications on the label attached to the oven.
Open the rear cover of the oven using a screwdriver, and remove the screws on
the cord clamp. Then, connect the power lines to the relevant connection terminals.
The ( )-terminal is designed for earthgrounding. First connect the yellow
and green lines (earthgrounding), which must be longer than the others. If
you use a plug-type socket, the plug must remain accessible after the oven is
installed. Samsung is not responsible for accidents caused by missing or faulty
earthgrounding.
8 English
Drill
Plug the oven into an electrical socket. If
a plug-type socket is not available due to
allowable current limitations, use a multi-
pole isolator switch (with at least 3 mm
spacing in-between) in order to meet safety
regulations. Use a power cord of sufficient
length that supports the specification H05
RR-F or H05 VV-F, min. 1.5-2.5 mm².
Minimum cross-sectional area
1.5 mm 2
2.5 mm
2
WARNING
Do not step on or twist the wires during installation, and keep them away from
heat-emitting parts of the oven.

Cabinet mount

If installing the oven in a built-in cabinet, the cabinet must have its plastic surfaces
and adhesive parts resistant up to 90 °C. Samsung is not responsible for damage to
furniture from the oven's heat emission.
The oven must be properly ventilated. For ventilation, leave a gap of about 50 mm
between the lower shelf of the cabinet and the supporting wall. If you install the
oven under a cooktop, follow the cooktop's installation instructions.
Required Dimensions for Installation
B
C
A
D
E
L
K
G
F
J
H
I
Oven (mm)
A 560 G Max. 506
B 175 H Max. 494
C 370 I 21
Max. 50 549
D J
E 595 K 572
F 595 L 550