Prepare To Install The Oven; Power Connection - Samsung NV7B565 Series User & Installation Manual

Accessories
The oven comes with different accessories that help you prepare different types of
food.
Wire rack
Universal tray (*)
Meat probe (*)
Steam tray (*)
NOTE
Availability of accessories with an asterisk (*) depends on the oven model.
FULL MANUAL_NV7B5765XAK_U4_DG68-01412D-00_EN.indd 7 FULL MANUAL_NV7B5765XAK_U4_DG68-01412D-00_EN.indd 7
Wire rack insert (*) Baking tray (*)
Extra-deep tray (*) Divider
2 screws (M4 L25) Steam container (*)
Air Fry tray (*)

Prepare to install the oven

Phillips Screwdriver

Power connection

Plug the oven into an electrical socket. If
a plug-type socket is not available due
to allowable current limitations, use a
multi-pole isolator switch (with at least
L N
3 mm spacing in-between) to meet safety
regulations. Use a power cord of sufficient
01 02 03
length that supports the specification H05
RR-F or H05 VV-F, min. 1.5 ~ 2.5 mm
01 BROWN or BLACK
02 BLUE or WHITE
03 YELLOW and GREEN
Rated current (A)
10 < A ≤ 16
16 < A ≤ 25
Check the output specifications on the label attached to the oven.
Open the rear cover of the oven using a screwdriver, and remove the screws on the
cord clamp. Then, connect the power lines to the relevant connection terminals.
The ( )-terminal is designed for earth grounding. First connect the yellow and green
lines (earth grounding), which must be longer than the others. If you use a plug-type
socket, the plug must remain accessible after the oven is installed. Samsung is not
responsible for accidents caused by missing or faulty earth grounding.
WARNING
Do not step on or twist the wires during installation, and keep them away from
heat-emitting parts of the oven.
Drill
.
2
Minimum cross-sectional area
1.5 mm
2
2.5 mm 2
English 7
2022-03-02 오후 12:48:53 2022-03-02 오후 12:48:53