Table of Contents
Advertisement
MAXXOS T211
Layout and function
4.2 Accessories required
4.2.1 Spindle flange
4.2.2 Drawtube adapter
4.2.3 Segmented clamping bushing
4.2.4 Workpiece end-stop
4.3 Optional accessories
4.3.1 Adapter for checking the air system
4.3.2 hs dock actuating unit
26
The spindle flange helps to adapt the clamping device to suit
the machine tool.
Depending on the scope of delivery, the spindle flange can
either be supplied with the unit or provided by the customer.
The drawtube adapter serves as a connector between the
drawtube on the machine tool and the clamping device and,
depending on the type of machine, can be configured in var-
ious forms.
The segmented clamping bushing is manufactured with a
customer-specified clamping diameter.
The workpiece end-stop is produced with an end-stop di-
mension that reflects customer wishes.
The following optional accessories are available for different
sizes of product.
Using the adapter makes it possible to operate the product
with an air system check.
The actuating unit is used for pneumatic and hydraulic ac-
tuation of the MANDO segmented mandrels.
Order hotline +49 7144.907-333
Advertisement
Table of Contents
