Accessories Required; Spindle Flange; Drawtube Adapter; Chuck Jaws - Hainbuch B-Top 260 Operating Instructions Manual

B-Top
Layout and function

4.2 Accessories required

4.2.1 Spindle flange

4.2.2 Drawtube adapter

4.2.3 Chuck jaws

4.3 Optional accessories

4.3.1 Integrated liner

4.4 Special aids

4.4.1 Release key

4.4.2 Assembly key

The spindle flange helps to adapt the clamping device to suit
the machine tool.
Depending on the scope of delivery, the spindle flange can
either be supplied with the unit or provided by the customer.
The drawtube adapter serves as a connector between the
drawtube on the machine tool and the clamping device and,
depending on the type of machine, can be configured in var-
ious forms.
The jaw chuck can be equipped with the following variety of
jaws:
Base jaws

Top jaws [soft, hard, aluminum]

 Claw jaws [hard]
Stepped block jaws [hard]

The following optional accessories are available for different
sizes of product.
The integrated liner, which can be replaced from the front,
enables workpieces to be adapted:
 Closed
With ejector

With capacity

With spray nozzles

With adjustable end-stop

The release key is used for installation and removal of the
chuck jaws.
The assembly wrench [included in the scope of delivery if
required] is used to install and remove the product on the
machine tool.
Order hotline +49 7144.907-333 27