MAXXOS T211
Layout and function
4.2 Accessories required
Machine adapter
4.2.1
4.2.2 Segmented clamping bushing
4.2.3 Workpiece end-stop
4.3 Optional accessories
4.3.1 Adapter for checking the air system
4.3.2 Monteq
The machine adapter is used to adapt the quick change-over
unit to the machine tool.
The segmented clamping bushing is manufactured with a
customer-specified clamping diameter.
The workpiece end-stop is produced with an end-stop di-
mension that reflects customer wishes.
The following optional accessories are available for different
sizes of product.
Using the adapter makes it possible to operate the product
with an air system check.
With the Monteq mounting aid, quick change-over units can
be transported to the machine adapter and locked into
place.
Various versions of the Monteq are available.
Order hotline +49 7144.907-333
27