Table of Contents
Advertisement
MAXXOS T211
Removal
10.3.1 Removal of the variant x-times with axial screw connection
70
INFORMATION
To be able to remove the changing part, it may be nec-
essary to remove the clamping element first.
1.
As described in the »Preparing the machine for re-
moval« chapter, prepare for the following steps.
2.
Move the clamping device into release position.
1.
Unfasten and remove the fixing screws on the changing
part.
2.
Take the changing part off the product.
Order hotline +49 7144.907-333
Advertisement
Table of Contents
