Accessories Required; Spindle Flange; Drawtube Adapter; Clamping Head - Hainbuch TOPlus mini Operating Instructions Manual

TOPlus mini / TOPlus premium pull-back
Layout and function

4.2 Accessories required

4.2.1 Spindle flange

4.2.2 Drawtube adapter

4.2.3 Clamping head

4.2.4 Workpiece end-stop

4.2.5 Test kit

4.3 Optional accessories

4.3.1 Jaw module

The spindle flange helps to adapt the clamping device to suit
the machine tool.
Depending on the scope of delivery, the spindle flange can
either be supplied with the unit or provided by the customer.
The drawtube adapter serves as a connector between the
drawtube on the machine tool and the clamping device and,
depending on the type of machine, can be configured in var-
ious forms.
The clamping head is there to support the workpiece being
machined. It consists of hard steel and rubber segments con-
nected by vulcanization.
Depending on workpiece requirements, various sizes of
clamping head are available, also with different profiles and
bores.
The workpiece end-stop is produced with an end-stop di-
mension that reflects customer wishes.
The test kit is only essential for TOPlus premium to align the
product.
The following optional accessories are available for different
sizes of product.
The jaw module is an adaptation clamping device for the
use with jaws. It enables the diameter of the jaw clamping
range to be expanded.
Order hotline +49 7144.907-333 31