Table of Contents
Advertisement
MANDO Adapt T212
Layout and function
4.2 Accessories required
4.2.1 Basic clamping device
4.2.2 Segmented clamping bushing
4.2.3 Workpiece end-stop
4.3 Special aids
4.3.1 Changing aid
30
The basic clamping device supports the adaptation clamping
device.
The segmented clamping bushing is manufactured with a
customer-specified clamping diameter.
The workpiece end-stop is produced with an end-stop di-
mension that reflects customer wishes.
If necessary, the changing aid is included in the scope of
delivery of the product [depending on size].
The changing aid secures the segmented clamping bush-
ing, preventing it from dropping during installation / re-
moval.
Order hotline +49 7144.907-333
Advertisement
Table of Contents
