Table of Contents
Advertisement
T
S
K
C
IRE
ERVICE
IT
OMPONENTS
O
PERATION
NOTE:
Tire service kit may vary, depending on trim level.
Tire Service Kit Components
1 — Sealant Bottle
2 — Deflation Button
3 — Power Button
4 — Sealant Hose (Clear)
5 — Pressure Gauge
6 — Mode Select Knob
7 — Power Plug (located on the bottom side of the
Tire Service Kit)
8 — Air Pump Hose (Black)
A
Using The Mode Select Knob And Hoses
ND
Your Tire Service Kit is equipped with the following
symbols to indicate the air or sealant mode.
Selecting Air Mode
Push in the Mode Select Knob and
turn to this position for air pump oper-
ation only. Use the Black Air Pump
Hose when selecting this mode.
Selecting Sealant Mode
Push in the Mode Select Knob and
turn to this position to inject the Tire
Service Kit Sealant and to inflate the
tire. Use the Sealant Hose (clear hose)
when selecting this mode.
Using The Power Button
Push and release the Power Button
once to turn on the Tire Service Kit.
Push and release the Power Button
again to turn Off the Tire Service Kit.
Using The Deflation Button
Push the Deflation Button to reduce
the air pressure in the tire if it
becomes overinflated.
IN CASE OF EMERGENCY
T
S
K
U
P
IRE
ERVICE
IT
SAGE
Replace the Tire Service Kit Sealant Bottle and
Sealant Hose prior to the expiration date
(printed at the upper left hand corner on the
bottle label) to assure optimum operation of the
system Ú page 237.
Tire Service Kit Sealant Expiration Date Location
The Sealant Bottle and Sealant Hose are a one
tire application use and need to be replaced
after each use. Always replace these compo-
nents immediately at your original equipment
vehicle dealer.
When the Tire Service Kit sealant is in a liquid
form, clean water and a damp cloth will remove
the material from the vehicle or tire and wheel
233
RECAUTIONS
7
Advertisement
Table of Contents
