Table of Contents
Advertisement
Key Fob For Keyless Ignition
1 — Unlock Button
2 — Liftgate Button (If Equipped)
3 — Lock Button
4 — Remote Start Button (If Equipped)
5 — PANIC Button
6 — Emergency Key
NOTE:
In case the ignition switch does not change with
the push of a button, the key fob may have a low
or fully depleted battery. A low key fob battery
can be verified by referring to the instrument
cluster, which will display directions to follow.
Improper disposal of key fob batteries may be
harmful to the environment. Please see an
authorized dealer for proper battery disposal
Ú page 308.
To Lock/Unlock The Doors And Liftgate
Push the interior door unlock button on the door
panel.
NOTE:
If the vehicle is unlocked using the interior door
panel, and no door is opened within 60 seconds,
the vehicle will relock and if equipped, the security
system will arm. You can change the current
setting within the Uconnect system Ú page 150.
Push and release the unlock button on the key fob
once to unlock the driver's door, or twice within five
seconds to unlock all the doors and the liftgate. To
lock all the doors and the liftgate, push the lock
button once.
When the doors unlock, the turn signals will flash
and Illuminated Approach will be activated. When
the doors lock, the turn signals will flash and the
horn will chirp. This setting can be adjusted in the
Uconnect system Ú page 150.
Key Left Vehicle Feature
If a valid key fob is no longer detected inside the
vehicle while the vehicle's ignition system is in the
ON/RUN or START position, the message "Key Left
Vehicle" will be shown in the instrument cluster
GETTING TO KNOW YOUR VEHICLE
display along with an interior chime. An exterior
audible and visual alert will also be activated to
warn the driver.
The vehicle's horn will rapidly chirp three times
along with a single flash of the vehicle's exterior
lights.
NOTE:
The doors have to be open and then closed in
order for the vehicle to check for the presence of
a key fob; the Key Left Vehicle feature will not
activate until all of the doors are closed.
These alerts will not be activated in situations
where the vehicle's engine is left running with
the key fob inside.
Replacing The Battery In The Key Fob
The replacement battery is one CR2032 battery.
NOTE:
Customers are recommended to use a battery
obtained from Mopar®. Aftermarket coin
battery dimensions may not meet the original
OEM coin battery dimensions.
Perchlorate Material — special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate for further information.
Do not touch the battery terminals that are on
the back housing or the printed circuit board.
15
2
Advertisement
Table of Contents
