Table of Contents
Advertisement
76
GETTING TO KNOW YOUR INSTRUMENT PANEL
Secondary Method For Oil Change Reset
Procedure
1. Without pushing the brake pedal, place the
ignition in the ON/RUN position (do not start
the engine).
2. Fully press the accelerator pedal, slowly, three
times within ten seconds.
3. Without pushing the brake pedal, place the
ignition in the OFF position.
NOTE:
If the indicator message illuminates when you start
the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
I
C
D
NSTRUMENT
LUSTER
ISPLAY
I
TEMS
NOTE:
The instrument cluster display menu items display
in the center of the instrument cluster. Menu items
may vary depending on your vehicle features.
Speedometer
Push and release the up
or down
button until the speedometer menu icon is
displayed in the instrument cluster display. Push
and release the OK button to toggle units, mph or
km/h (If Equipped), of the speedometer.
Vehicle Info
Push and release the up
button until the Vehicle Info menu icon is displayed
in the instrument cluster display. Push and release
the left
or right
through the information submenus and push and
release the OK button to select or reset the
submenus.
Tire Pressure: This menu option will display the
current tire pressure. A low tire will be high-
lighted in red for the 7 inch cluster and it will be
highlighted in white text for the 3.5 inch cluster.
Coolant Temperature: This menu option will
display the current coolant temperature of the
M
ENU
vehicle.
Transmission Temperature: This menu will
display the current transmission temperature of
the vehicle.
Oil Life: This menu option will display the current
oil life of the vehicle.
Oil Temperature: This menu option will display
the current oil temperature level of the vehicle.
arrow
Battery Voltage: This menu option will display
the current voltage level of the battery.
Driver Assist
or down
arrow
Push and release the up
button until the Driver Assist menu title is
highlighted in the instrument cluster display.
arrow button to scroll
Adaptive Cruise Control (ACC) Menu — If Equipped
The instrument cluster display displays the current
ACC and LaneSense system settings. The
information displayed depends on the status of
ACC and LaneSense.
Push the ACC on/off button (located on the
steering wheel) until one of the following displays
in the instrument cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, and LaneSense is OFF,
the display will read "Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will read
"Adaptive Cruise Control Ready."
Push and release the SET + or the SET- button
(located on the steering wheel) and the following
will display in the instrument cluster display:
or down
arrow
Advertisement
Table of Contents
