Table of Contents
Advertisement
18
GETTING TO KNOW YOUR VEHICLE
K
E
'
G
™ I
EYLESS
NTER
N
O
(I
E
)
F
QUIPPED
This feature allows the driver to operate the
ignition switch with the push of a button as long as
the key fob is in the passenger compartment.
The START/STOP ignition button has several
operating modes that are labeled and will
illuminate when in position. These modes are OFF,
ACC, ON/RUN, and START.
Push Button Ignition
1 — OFF
2 — ACC
3 — ON/RUN
The push button ignition can be placed in the
GNITION
following modes:
OFF
The engine is stopped
Some electrical devices (e.g. power locks,
alarm, etc.) are still available
ACC
Engine is not started
Some electrical devices are available (e.g.
power sunroof, power windows, etc.)
ON/RUN
Driving position
All electrical devices are available (e.g. climate
controls, heated seats, etc.)
START
The engine will start (when foot is on the brake)
NOTE:
If the ignition switch does not change with the push
of a button, the key fob may have a low battery. In
this situation, a backup method can be used to
operate the ignition switch. Put the nose side (side
opposite of the emergency key) of the key fob
against the START/STOP ignition button and push
to operate the ignition switch.
Starting The Ignition With Depleted Key Fob Battery
WARNING!
Before exiting a vehicle, always come to a
complete stop, then shift the automatic trans-
mission into PARK, apply the parking brake,
place the engine in the OFF position, remove
the key fob from the vehicle and lock your
vehicle. If equipped with Keyless Enter 'n Go™,
always make sure the keyless ignition is in OFF
position, remove the key fob from the vehicle
and lock the vehicle.
Never leave children alone in a vehicle, or with
access to an unlocked vehicle.
(Continued)
Advertisement
Table of Contents
