DVI DL 201 Rx rear panel features
The illustration below shows the rear panel features of the
DVI DL 201 Rx.
POWER
12V
0.4A MAX
12
DVI DL 201 Rx rear panel features
l
Power input — An optional 12 VDC power supply (not
provided) connects to this two-pole, 3.5 mm captive screw
connector.
N
m
Twisted pair inputs — Three RJ-45 jacks receive video, remote
power, and pass-through communications/control signals from
the transmitter. They can also send pass-through control signals
via the transmitter.
N
INPUTS
1
2
13
The receiver can be remotely powered by the transmitter.
The DVI DL 201 transmits high frequency signals via
these TP outputs. Connections between the transmitter
and receiver must be point to point. It is recommended
that there should be no couplers, adapter, or patch panels
between the transmitter and receiver units.
DVI DL 201 Tx/Rx • Installation
3
DO NOT
CONNECT
INPUTS TO
LAN
2-11