Extron electronics Dual Link DVI Transmitter and Receiver DVI DL 201 Rx User Manual page 42

Reference Information
Specifications
Video
Maximum data rate....................... 10 Gbps (3.3 Gbps per color)
Maximum pixel clock ................... 330 MHz (165 MHz per link)
Resolution range ........................... Up to 2560x1600 @ 60 Hz
Formats ........................................... RGB and YCbCr digital video
Standards........................................ DVI 1.0, HDMI 1.2
Video input and loop-through — transmitter
Number/signal type..................... 1 dual link DVI-D input
Dual link DVI is backwards compatible with all single link
N
DVI/HDMI signals.
Connectors ..................................... 2 DVI-I female (1 for input, 1 for
Interconnection between transmitter and receiver
Connectors ..................................... (3) RJ-45 per unit for 2 CAT 5/5e/7 or STP
Termination standards.................. TIA/EIA T568A or T568B. Pin
Signal transmission distance
2560x1600 @ 60 Hz
The transmission distance varies greatly depending on the signal
N
resolution and on the type of cable, graphics card, and display
used in the system.
DVI DL 201 Tx/Rx • Reference Information
A-2
CAT 5/5e/6/7 STP cable
CAT 5/5e/6 UTP (unshielded twisted pair) cable
1 dual link DVI-D local loop-through
loop-through)
(shielded twisted pair) cables connecting
the transmitter and receiver.
configurations for each standard are
available in the "Installation" chapter.
Up to 125' (38 m)
Up to 100' (30 m)
Longer distances are possible with lower
rates