Single Link/Dual Link Dvi - Extron electronics Dual Link DVI Transmitter and Receiver DVI DL 201 Rx User Manual

Installation, cont'd

Single Link/Dual Link DVI

Dual Link DVI carries signals at resolutions up to
2560x1600 @ 60 Hz. Single Link DVI carries signals at
resolutions up to 1920x1200 @ 60 Hz.
Video Resolution
(60 Hz)
1024x768
720p
1080i
1920x1200
1600x1200
1080p
2560x1600
N
•
•
•
DVI DL 201 Tx/Rx • Installation
2-16
Single Link Mode
UTP
(60 m)
(30 m)
The transmission distance varies greatly depending on
signal resolution and on the type of cable, graphic card,
and display used in the system.
To operate in Dual Link mode, all three TP cables are
required and both the source and display devices must
support Dual Link DVI signals.
To operate in Single Link mode, only TP cables 1 and 2 are
required. Dual Link DVI is backwards compatible with
Single Link DVI.
The DVI/HDMI 201 (Single Link) receivers can be used
with the DVI DL 201 transmitter, in Single Link mode
(using only TP cables 1 and 2).
STP
200' 200'
(60 m)
100' 125'
(38 m)
N/A N/A
Dual Link Mode
UTP STP
200' 200'
(60 m) (60 m)
200' 200'
(60 m) (60 m)
100' 125'
(30 m) (38 m)