6 Set up with the display and adjustment module PLICSCOM
Service - PIN
Info
38
Copy sensor data
Copy sensor data?
In this menu item, the PIN is activated/deactivated permanently.
Entering a 4-digit PIN protects the sensor data against unauthorized
access and unintentional modifications. If the PIN is activated perma-
nently, it can be deactivated temporarily (i.e. for approx. 60 min.) in
any menu item. The instrument is delivered with the PIN set to 0000.
PIN
Activate permanently?
Only the following functions are permitted with activated PIN:
•
Select menu items and show data
•
Read data from the sensor into the display and adjustment module
In this menu item the most important sensor information can be
displayed:
•
Instrument type
•
Serial number: 8-digit number, e.g. 12345678
Instrument type
Serial number
•
Date of manufacture: Date of the factory calibration
•
Software version: Edition of the sensor software
Date of manufacture
Software version
•
Date of last change using PC: Date of the last change of sensor
parameters via PC
Last change using PC
•
Sensor details, e.g. approval, process fitting, seal, measuring cell,
measuring range, electronics, housing, cable entry, plug, cable
length etc.
Sensor characteristics
Display now?
VEGASON 61 • Four-wire 4 ... 20 mA/HART