Vega VEGASON 61 Operating Instructions Manual page 31

Display - Backlight
Diagnosis - Peak value
VEGASON 61 • Four-wire 4 ... 20 mA/HART
6 Set up with the display and adjustment module PLICSCOM
•
Lin. percent
The selection " scaled" opens the menu items " Display unit" and "
Scaling". In " Display unit" there are the following options:
•
Height
•
Ground
•
Flow
•
Volume
•
Without unit
Depending on selection, the different units are in turn available.
In the menu item " Scaling", the requested numerical value with deci-
mal point is entered for 0 % and 100 % of the measured value.
There is the following relationship between the indication value in
the menu " Display" and the adjustment unit in the menu " Device
settings":
•
Indication value " Distance": Presentation of the measured value in
the selected adjustment unit, e.g. m(d).
Displayed value
►
Scaled
Display unit
►
Volume
►
l
Scaling
0 % = 0.0 l
100 % = 100.0 l
A background lighting integrated by default can be adjusted via the
adjustment menu. The function depends on the height of the supply
voltage. See " Technical data/Voltage supply".
To maintain the function of the device, the lighting is temporarily
switched off if the power supply is insufficient.
Backlight
In the default setting, the lightning is switched off.
The respective min. and max. measured values are saved in the sen-
sor. The values are displayed in the menu item " Peak values".
•
Min. and max. distance in m(d)
•
Min. and max. temperature
31