6 Set up with the display and adjustment module PLICSCOM
Service - Adjustment unit
Service - Language
Service - SIL
36
Function
Unit of measurement
The values of the following menu items are not reset to the reset
values (see table) with " Reset":
Function
Backlight
Language
HART mode
Default setting
Like basic adjustment, but in addition, special parameters are reset to
default values.
7)
Peak value indicator
The min. and max. distance and temperature values are reset to the
actual value.
In this menu item you select the internal arithmetic unit of the sensor.
Unit of measurement
m(d)
The sensor is already set to the ordered national language. In this
menu item you can change the language. The following languages are
available as of software version 3.50:
•
Deutsch
•
English
•
Français
•
Espanõl
•
Pycckuu
•
Italiano
•
Netherlands
•
Japanese
•
Chinese
Language
German
The functional safety is already activated Ex factory for instruments
with SIL qualification. For instruments Ex factory without SIL qualifica-
tion, the functional safety must be activated by the user for applica-
tions according to SIL via the indicating and adjustment module. The
SIL factory setting cannot be deactivated by the user.
Special parameters are parameters which are set customer-specifically on
7)
the service level with the adjustment software PACTware.
Reset value
m(d)
Reset value
No reset
No reset
No reset
VEGASON 61 • Four-wire 4 ... 20 mA/HART