Chicco BebeCare Oasys i-Size Manual page 30

30 minutes, a push notification will appear on
the smartphone, accompanied by a brief acous-
tic signal. The user can disable only the acoustic
signal on the "settings/notifications" screen.
3.6 BATTERY
The level of the battery in the BebèCare device
can be monitored via the APP. If the level is low,
contact Customer Service to receive instruc-
tions on its replacement.
THIS PRODUCT COMPLIES WITH
THE DIRECTIVE 2012/19/EU.
The crossed bin symbol on the ap-
pliance indicates that the product, at
the end of its life, must be disposed
of separately from domestic waste,
either by taking it to a separate waste disposal
site for electric and electronic appliances or by
returning it to your dealer when you buy another
similar appliance. The user is responsible for
taking the appliance to a special waste disposal
site at the end of its life. If the disused appliance
is collected correctly as separate waste, it can
be recycled, treated and disposed of ecolog-
ically; this avoids a negative impact on both
the environment and health, and contributes
towards the recycling of the product's materials.
For further information regarding the waste
disposal services available, contact your local
waste disposal agency or the shop where you
bought the appliance.
CONFORMITY WITH EU DIREC-
TIVE 2006/66/EC as amended.
The crossed bin symbol on the bat-
tery or its packaging, means that
the batteries, at the end of their life, should be
disposed of separately from the municipal
waste stream via designated collection facili-
ties appointed by the government or the local
authorities, or otherwise returned to the dealer
when purchasing new equivalent rechargea-
ble or non-rechargeable batteries. Chemical
symbols (Hg for mercury, Cd for cadmium, Pb
for lead) printed beneath the crossed-out
wheeled bin symbol indicate the type of sub-
stance contained in the battery. The user is re-
sponsible for taking the batteries to special
waste disposal sites at the end of their life so
they can be processed and recycled. The cor-
rect disposal of spent batteries by means of
separate waste collection and subsequent re-
cycling, treatment and environmentally sound
disposal will help prevent potential negative
consequences for the environment and hu-
man health and favour the recycling of the
materials of which the batteries are made. Im-
proper disposal of the product by the user may
harm the environment and human health. For
further information regarding the waste dis-
posal services available, contact your local
waste disposal agency or the shop where you
purchased the product.
The BebèCare "Safety system for children in
the car" was developed based on the invention
made by the engineer Stefano Fontana.
4. ADDITIONAL OPERATIONS
4.1 PLACING THE CHILD IN THE CHILD
CAR SEAT AND ADJUSTING THE SAFETY
HARNESS
To adjust the harness straps, proceed as fol-
lows:
1. Press the adjustment button and pull the
child car seat harness straps to loosen them
(Fig. 19).
2. Press the red button (Fig. 20) to open the
buckle.
3. Place the baby on the seat.
WARNING! The harness straps must always
be adjusted to adapt to the child's growth
phase. Before installing the child car seat in-
side the vehicle, adjust the harness straps to
the right height. To adjust them correctly, the
harness straps must come out from the back-
rest at the height of the child's shoulders. The
headrest and straps can be adjusted simul-
taneously in height to 6 different positions
using button X to follow your child's growth.
4. Overlap the two ends of the harness straps,
insert them together inside the buckle until
you hear them clicking (Fig. 21)
WARNING! Never insert just one end of the
harness into the buckle or insert them one at a
time. Press button Q to adjust the straps.
5. Tighten the child car seat's safety harness by
30