Chicco BebeCare Oasys i-Size Manual page 28

WARNING:
• Check to perform each time BebèCare is used:
• Check that is functioning correctly as de-
scribed in paragraph 3.1 How to activate
BebèCare point d).
• The smartphone must be turned on and have
a sufficient battery charge for the period of
use when paired with BebèCare.
• Bluetooth® must be active.
• "Airplane" mode must be deactivated.
• The smartphone SIM must have enough credit.
• GPS must always be active.
• If two or more smartphones are used that have
the BebèCare APP installed, it is necessary to
identify which one is effectively connected to the
car seat and therefore must never be abandoned.
3.1 HOW TO ACTIVATE BEBÈCARE
a) Download the BebèCare APP
The BebèCare APP must be downloaded. When
accessing for the first time, the APP will provide
all the instructions to follow to register the
account and use BebèCare.
b) Create the family account
A "family account" must be created with a single
password. This account will be the only one that
can be used by those who use that specific car
seat with BebèCare.
The password is shared with all users who interact
with the car seat on which BebèCare is installed.
IMPORTANT: When creating the family account,
an internet connection must be available (mo-
bile data or WiFi network).
IMPORTANT: If the family password is changed,
the new password must be shared with all the
users who use the same family account.
c) Enter the emergency numbers
When accessing for the first time, it is necessary
to enter the emergency numbers to which an
alarm SMS will be sent (second level - see para-
graph 3.2 How BebèCare functions) containing
the data needed to geolocate the area where
the baby is located.
A minimum of 1 to a maximum of 5 emergency
numbers must be entered.
The emergency numbers must be selected
from the contacts in your smartphone and can
be added, deleted and/or replaced in the future.
IMPORTANT: During this operation, an internet
connection must be available (mobile data or
WiFi network).
IMPORTANT: The emergency numbers must
be mobile phone numbers and not landline
or national emergency numbers.
IMPORTANT: Always check that the emergency
numbers are correct and are functioning after
entering them.
d) Associate the car seat with the family
account
To associate the car seat with BebèCare to the
family account , proceed with scanning the QR
code on the car seat. The QR code is printed on
the type approval label and can only be seen
after removing the silver film. By scanning the
QRCode, the application recognises the car seat
model, then simply turn on Bluetooth®, apply
pressure on the car seat and move the smart-
phone near the car seat to be associated and
connect the car seat with the family account.
Up to a maximum of 3 car seats with BebèCare
can be associated with the same family account.
The specific car seat can be associated with
ONLY one family account.
IMPORTANT: If the QR code is already visible
or partially visible, contact Customer Service.
IMPORTANT: When scanning the QR code, an
internet connection must be available (mobile
data or WiFi network).
e) Check the correct operation of the
sensors
Periodically perform pressure tests on the car
seat (this pressure test should be complete
without the baby in the car seat) to check that
BebèCare is functioning.
f) Enter the information about the baby
After associating the car seat with the family
account, enter the name and date of birth of
the child. You can also enter a photograph.
Artsana does not guarantee equipment oper-
ation in conditions other than those indicated
above, or in the case of improper use (including,
but not limited to, use with minors who are
28