Choosing A Location; Table 1-4 Location Criteria - Sun Microsystems StorEdge L280 User Manual

Autoloader/library tape storage
Hide thumbs Also See for StorEdge L280:
Table of Contents

Advertisement

1.2.2

Choosing a Location

Choose a location that meets the criteria in
TABLE 1-4
Room temperature
Power source
Air quality
Adequate clearance
Location Criteria
50–104˚ F (10–40˚ C)
AC power voltage: 100–127V or 200–240V
Auto Ranging
Current Rating: 100–127V, 1.8A, 50/60 HZ, 220–240V, .9A,
50/60 HZ Auto Ranging
Power Maximum: 120 Watts
Maximum Watts: 100 Watts, 100–127V (60 HZ)
Maximum Watts: 90 Watts, 200–240V (50 HZ)
Minimal particulate contamination. Avoid areas near
frequently-used doors and walkways, stacks of supplies that
collect dust, smoke-filled rooms, large or high-speed printers.
Do not use filters.
Caution: Excessive dust and debris can damage DLT tapes
and the tape drive.
Desktop configuration—free standing:
• Back 6 inches/ 15 cm
• Front 8 inches/ 20 cm
• Sides 1 inch/ 2.5 cm
Rackmount configuration—requires 5 EIA units in a rack
(1 EIA = 1.75 inches)
:
TABLE 1-4
Chapter 1
Getting Started
1-5

Advertisement

Table of Contents
loading

Table of Contents