2.7
Setting or Viewing SCSI IDs
To enter the SCSI IDs menu, press the Next button to enter the following:
ADMIN * / PSWD ### ### ### / SCSI IDs *
Note – Before setting SCSI IDs, check to see which IDs are available.
When you choose
SET IDs * assigns a SCSI ID to the drive and a SCSI ID to the autoloader
controller.
VIEW IDs * displays the drive and autoloader controller settings.
TABLE 2-4 shows the default settings.
TABLE 2-4
Device
Autoloader ID
Drive ID
2.7.1
Setting SCSI IDs
To set SCSI IDs, press the Next button to enter the following:
ADMIN * / PSWD ### ### ### / SCSI IDs */ SET IDs *
1. When
AUTOLOADER ID #
AUTOLOADER ID #
DRIVE ID #
ID settings.
2. Press the
Enter
SCSI IDs
Default SCSI IDs
SCSI ID
1
0
is displayed, press
SET IDs *
,
DRIVE ID #
stands for the current SCSI ID of the autoloader controller.
is the current SCSI ID of the drive. Use
button until the setting to change is displayed, and then press
Next
. The current SCSI address flashes.
, you have two options:
Enter
.
, or
UPDATE IDS NOW
Chapter 2
is displayed.
to save the
UPDATE IDS NOW
Operating the Autoloader
2-15