Mounting The Autoloader In A Rack; Figure 1-2 Rack Kit Parts - Sun Microsystems StorEdge L280 User Manual

1.2.3

Mounting the Autoloader in a Rack

For instructions on connecting desktop units, go to Section 1.3, "Connecting the
Autoloader‚" on page 1-15.
1.2.3.1 Tools and Components
Before you begin, make sure you have the following:
Tools:
#2 Phillips screwdriver
Flat-head screwdriver
Kit Components (parts are labeled for easy identification):
1. Instruction poster (Quantity 1)
2. Cable ties (Quantity 4)
3. M4 x 10 mm pan phillips (Quantity 6)
4. 10-32 pan phillips (Quantity 10)
Note – The rack kit will contain extra parts.
FIGURE 1-2
1-6 Sun StorEdge L280 User's Guide • June 1998
™ ™
Rack Kit Parts
5. 10-32 clipnuts (Quantity 10)
6. Support bezel (Quantity 1)
7. Filler panel (Quantity 1)
8. Shelf and rail assembly (Quantity 1)