Safety Information; Principle - Wacker Neuson AR 36 Series Operator's Manual

External vibrators
2.

Safety information

2.1

Principle

State of the art
This machine has been constructed with state-of-the-art technology according to
the recognized rules of safety. Nevertheless, when used improperly, dangers to
the life and limb of the operator or to third persons or damage to the machine or
other materials cannot be excluded.
Proper use
The machine may only be used for the excitation of all kinds of molds and
formworks, vibratory tables, vibratory stands for the compaction of fresh
concrete.
Other special applications must be checked and released by WACKER.
Its proper use also includes the observance of all instructions contained in this
operator's manual as well as complying with the required service and
maintenance instructions.
Any other use is regarded as improper. Any damage resulting from improper use
will void the warranty and the liability on behalf of the manufacturer. The operator
assumes full responsibility.
Structural modifications
Never attempt to modify the machine without the written permission of the
manufacturer. Failure to do so will endanger your safety! In addition, this will void
the warranty and the liability on behalf of the manufacturer.
Requirements for operation
The ability to operate the machine safely requires:
Operation
Operate the machine only as intended and only when in proper working
condition.
Operate the machine in a safety-conscious manner with all safety devices
attached and enabled. Do not modify or disable any safety devices.
Before starting operation, check that all control and safety devices are
functioning properly.
Never operate the machine in a potentially explosive environment.
SV00079GB.fm
All manuals and user guides at all-guides.com
Proper transport, storage and setup.
Careful operation.
Careful service and maintenance.
3