Dynalink ADSL2+ Wireless VoIP Router RTA1046VW User Manual page 71
Adsl2+ wireless voip router
Hide thumbs
Also See for ADSL2+ Wireless VoIP Router RTA1046VW:
- Quick setup manual (21 pages) ,
- Specifications (3 pages) ,
- Configuration manual (7 pages)
Table of Contents
Advertisement
6.
On the Configure LAN side Settings page, key in the information for your
LAN, e.g.,
Primary IP Address: 192.168.1.1
Subnet mask: 255.255.255.0
Start IP Address: 192.168.1.2
End IP Address: 192.168.1.254
7.
Check the network information. Make sure the settings match the settings
provided by ISP. Click Finish.
8.
Now the IAD is well configured. You can access into Internet.
Chapter 3: Accessing the Internet
57
Advertisement
Table of Contents
Need help?
Do you have a question about the ADSL2+ Wireless VoIP Router RTA1046VW and is the answer not in the manual?