Uninstalling The Usb Driver; For Windows Me; For Windows 2000 - Dynalink ADSL2+ Wireless VoIP Router RTA1046VW User Manual

Uninstalling the USB Driver

For Windows ME

To uninstall the USB driver, please follow the procedures below.
Method One:
Unplug the USB cable from the USB port on your PC.
Choose Programs – Askey Broadband – Uninstall Askey ADSL Router
USB Driver from the Start menu.
The InstallShield Wizard dialog will appear.
A dialog appears to confirm whether you really want to remove the USB
driver or not. Please click Ok.
When the Maintenance Complete screen appears, the USB driver is
removed successfully. Click Finish.
Method Two:
Unplug the USB cable between your IAD and your PC. Then click OK.
Choose Settings – Control Panel from the Start menu. Choose
Add/Remove Programs.
A dialog appears to ask you to choose the program that you want to remove.
Please select Askey ADSL Router USB Driver and click Change/Remove.
The InstallShield Wizard dialog will appear.
When the Maintenance Complete screen appears, the USB driver is
removed successfully. Click Finish

For Windows 2000

To uninstall the USB driver, there are two ways to do it. Please do the following
procedures.
Method One:
To safely unplug the USB cable from the USB port on your PC:
1. Go to the right lower corner for Unplug and Eject Hardware and left click
on it.
2. Click the dialog for Stop Askey ADSL Router USB Remote NDIS
Device.
Chapter 2: System Requirement and Installation
19