Dynalink ADSL2+ Wireless VoIP Router RTA1046VW User Manual page 170

Wireless IAD User Manual
8.
9.
10. Choose Use a certificate on
11. Check the Validate server
12. In the Trusted Root
13. Click OK three times to close
14. Now the configuration for WPA
156
The Enable network access
control using IEEE 802.1X is
selected by default, and
Protected EAP (PEAP) is
selected from the EAP type.
Click Properties under EAP
type.
this computer option and select
Use simple certificate
selection (Recommended).
certificate check box if server
certificate validation is required
Certification Authorities field,
check the check box beside the
name of the certificate authority
from which the server certificate
was downloaded. (e.g.,
askey.savd.tw)
Note that if you leave all check
boxes unchecked, you will be
prompted to accept a
connection to the root
certification authority during the
authentication process.
the dialogs and save all the
settings until return to Network
Connections.
authentication is completed. And
you may start to use the
wireless device.