Sullair LS-20 Operator's Manual And Parts List page 13

3.1 TABLE OF SPECIFICATIONS
(50 Hz)
MODEL KW COOLING
100- - H
(I) 75 AIR
(ENCL.)
100- - H
(I) 75 AIR
(W/O ENCL.)
100- - H
(I) 75 WATER
(ENCL.)
100- - H
(I) 75 WATER
(W/O ENCL.)
(60 Hz)
(III)
MODEL HP COOLING
100- - L
(II) 100 AIR 500
(ENCL.)
100- - L
(II) 100 AIR
(W/O ENCL.)
100- - L
(II) 100 WATER 500
(ENCL.)
100- - L
(II) 100 WATER
(W/O ENCL.)
100- - H
(I) 100 AIR
(ENCL.)
100- - H
(I) 100 WATER
(W/O ENCL.)
100- - H
(I) 100 AIR
(ENCL.)
100- - H
(I) 100 WATER
(W/O ENCL.)
(I) Model H Maximum Pressure: 125 psig/8.6 bar
(II) Model L Maximum Pressure: 110 psig/7.6 bar
(III) Includes standard and 24KT. New series pressure range designations appearing after model number are as follows:
"L" - - 7.0 to 7.5 bar
(IV) The minimum distance that the compressor should be from surrounding walls and ceilings is 3 ft/915 mm, and preferably 6 ft/1829 mm
or more from the fan air discharge end of the compressor.
(V) The minimum height allowance needed to service the separator elements is 6 ft, 3 in/1905 mm.
(VI) Weight includes enclosure.
NOTE: dBA RATINGS FREE FIELD NOISE LEVELS: 75 dBA (ENCLOSED), 85 dBA (OPEN).
COMPRESSOR:
Type:
Configuration:
Bearing Type:
Lubricant:
Coolant :
Sump Capacity:
CAPACITY LENGTH
3
(M /MIN) (MM)
13.45 2398
13.45 2002
13.45 2398
13.45 2002
CAPACITY LENGTH
(ACFM) (IN)
94 48
500 79
94 48
500 79
460 94
460 79
460 94
460 79
"H" - - 8.0 to 8.5 bar.
Positive displacement, fluid--lubricated, twin
rotary screws
Single--stage geared integral drive
Anti--friction
Pressurized Sullube 32
S ee S ec t ions
9 gallons (34 liters)
SPECIFICATIONS
DIMENSIONS (IV)
WIDTH HEIGHT (V)
(MM) (MM)
1219 1886
1219 1525
1219 1886
1219 1525
WIDTH HEIGHT (V)
(IN) (IN)
74 1/4 3270
48 60
74 1/4 3270
48 60
48 74 1/4
48 60
48 74 1/4
48 60
3. 2 and 3. 3 on Lubr ic at ion
(Continued on page 8)
Section 3
WEIGHT (VI)
(KG)
1483
1197
1483
1197
WEIGHT (VI)
(LB)
2640
2640
3270
2640
3270
2640
7