Table of Contents
Advertisement
8
Smart Shop "M" Maker 2 - 3 Phase Power
Important Safety Instructions
Read and understand all warnings and operating instructions before using this equipment. Failure to follow all
instructions listed below, may result in electric shock, fire, and/or serious personal injury or property damage.
Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery,
there are certain hazards involved with the operation of the product. Using the machine with respect and caution will
considerably lessen the possibility of personal injury. However, if normal safety precautions are overlooked or
ignored, personal injury to the operator may result. Safety equipment such as guards, push sticks, hold-downs,
feather boards, goggles, dust masks and hearing protection can reduce your potential for injury. But even the best
guard won't make up for poor judgment, carelessness or inattention. Always use common sense and exercise
caution in the workshop. If a procedure feels dangerous, don't try it. Figure out an alternative procedure that feels
safer. REMEMBER: Your personal safety is your responsibility.
This machine was designed for certain applications only. We strongly recommend that this machine not be
modified and/or used for any application other than that for which it was designed. If you have any questions relative
to a particular application, do not use the machine until you have first contacted the manufacturer to determine if it
can or should be performed on the product.
If you have any questions relative to its application do not use the product until you have contacted the
manufacturer and we have advised you.
General Safety Rules
FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.
FOR YOUR OWN SAFETY, READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE OPERATING
THE MACHINE. Learn the unit's application and limitations as well as the specific hazards peculiar to it.
KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
DON'T USE IN DANGEROUS ENVIRONMENT. Don't use this unit in damp or wet locations or expose it to rain.
Keep work area well-lighted.
KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area.
DISCONNECT UNIT before servicing.
CHECK DAMAGED PARTS. Before further use of the unit, properly repair or replace any part that is damaged.
Safety Rules:
//Machine Category
Proposition 65 Warning of Harmful Exposure
Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals
known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
·
Lead from lead-based paint.
·
Crystalline silica from bricks, cement, and other masonry products.
·
Arsenic and chromium from chemically treated lumber.
Your risk of exposure varies, depending on how often you do this type of work. To reduce your exposure to these
chemicals, work in a well-ventilated area and work with approved safety equipment, such as face or dust masks
that are specifically designed to filter out microscopic particles.
Notes Concerning Noise Emission
Given that there exists a relationship between noise level and exposure times, it is not possible to precisely
determine the need for supplementary precautions. The factors affecting the true level of exposure to operators are
clearly the amount of time exposed and the characteristics of the working environment, such as other sources of
dust and noise, etc.,for example, adjacent machines - in other words, the level of ambient noise. It is possible that
Advertisement
Table of Contents
