Table of Contents
Advertisement
Smart Shop "M" Maker 2
25
Establishing Home Position
When the B57E HHC Handheld Controller is first powered on, the user will be prompted with the
"HomeTypeAtStart" window.
The machine needs to be homed each time the machine is powered & when positioning is lost.
This resets your machine coordinates origin, relative to the home switches and flags.
The tool locations are relative to the machine "Home". All table measurements parameters are relative to "Home".
The default selection is "All Axis Home". Press REF/OK to begin homing all axes or select another option.
Advertisement
Table of Contents
