Smart Shop "M" Maker 2
49
Run procedure to calculate Tool Offsets (Cont'd.)
Set XY Work Origin.
Start with Tool 1, Tool 1 = Master Tool Bit.
Press and hold the "MENU" button --> press "TOOLSET" button -->release both buttons.
Once Tool 1 has touched off, Switch to Tool 2, using the Tool Switch button.
Press and hold the "MENU" button --> press "TOOLSET" button --> release both buttons.
Proceed to Touch Off all Tools in ascending order.
Switch back to Tool 1, using the Tool Switch button. Offsets are now calculated.