laguna Smart Shop M2 Owner's Manual page 32

32 Smart Shop "M" Maker 2 - 3 Phase Power
1.Select a router bit and its corresponding collet.
****Note-The collets & spindle nut must be cleaned regularly. Ensure that the slots in the collets are free
of debris.
2. Press the collet into the spindle nut until it snaps into place.
3. Thread on the nut and collet by hand, onto the tool cone.
4. Insert the router bit into the collet.
5. Tighten the spindle nut. Use the provided wrench and tool cone holder on the back of the machine frame.