1. Manuals
  2. Brands
  3. laguna Manuals
  4. Industrial Equipment
  5. CFLUX1
  6. Manual

laguna CFLUX1 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1.5HP CYCLONE
1 MICRON CANISTER

Advertisement

Table of Contents
loading

Related Manuals for laguna CFLUX1

Summary of Contents for laguna CFLUX1

  • Page 1 1.5HP CYCLONE 1 MICRON CANISTER...
  • Page 2 TABLE OF CONTENTS Important Safety Instructions Safety Guidelines - Definitions General Safety Rules Additional Safety For Dust Collectors Power Connections Motor Specifications Grounding Instructions Key Features and Components Functional Description Product Specifications Unpacking Assembly General Tool Assembly Maintenance Procedures Cleaning the Filter Changing the Filter Bag Emptying the Drum Routine Inspection...

  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below, may result in electric shock, fire, and/or serious personal injury or property damage. Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, there are certain hazards involved with the operation of the product.
  • Page 4 4. Do not use this machine for other than its intended use. If used for other purposes, LAGUNA TOOLS INC., disclaims any real or implied warranty and holds itself harmless from any injury that may result from that use.
  • Page 5 Your risk of exposure varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment, such as face or dust masks that are specifically designed to filter out microscopic particles.
  • Page 6 22.Maintain a balanced stance at all times so that you do not fall or lean against the dust collector. Do not overreach or use excessive force to perform any machine operation. 23.Use the right tool at the correct speed and feed rate. Do not force a tool or attachment to do a job for which it was not designed.

  • Page 7: General Safety Rules

    Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage. GENERAL SAFETY RULES WARNING FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY. FOR YOUR OWN SAFETY, READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE OPERATING THE MACHINE.
  • Page 8 Dust allergies. Dust from certain woods may cause an allergic reaction in people and animals. Make sure you know what type of wood dust you will be exposed to in case there is a possibility of an allergic reaction. Wear respirator. Fine dust that is too small to be caught in the filter will be blown into the ambient air during operation.

  • Page 9: Power Connections

    Regular cleaning. Regularly check/empty the collection bags or drum to avoid the buildup of fine dust that can increase the risk of fire. Make sure to regularly clean the surrounding area where the machine is operated—excessive dust buildup on overhead lights, heaters, electrical panels, or other heat sources will increase the risk of fire.

  • Page 10: Motor Specifications

    MOTOR SPECIFICATIONS Your machine is wired for 110 volts, 60 HZ alternating current. Before connecting the machine to the power source, make sure the switch is in the "OFF" position. GROUNDING INSTRUCTIONS THIS MACHINE MUST BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRIC SHOCK.
  • Page 11 IN ALL CASES, MAKE CERTAIN THE RECEPTACLE IN QUESTION IS PROPERLY GROUNDED. IF YOU ARE NOT SURE, HAVE A QUALIFIED ELECTRICIAN CHECK THE RECEPTACLE. 110 VOLT Single-Phase Operation The motor supplied with your machine is a dual voltage, 110/220 volt motor. It is shipped ready-to-run for 110 volt operation.
  • Page 12 Hand held remote controller ON button OFF button *Remote set button *Used to match up a new hand held controller with the remote switch PROGRAMMING THE REMOTE CONTROL 1. Ensure the machine is switch ON before programming the remote control. 2.

  • Page 13: Product Specifications

    PRODUCT SPECIFICATIONS Motor Specs: 1.5 HP Electrical Specs: 110V/220V / 60Hz / 1PH / 3450 RPM Running AMP (with 6” inlet) 18.8A at 110V; 9.4A at 220V Air Volume: 900CFM (cubic feet per minute) Max. static pressure 9 Inches of water Fan size 13”...
  • Page 14 UNPACKING Your 1.5HP Mobile Dust Cyclone comes packed in a single box. Before attempting to assemble this machine, follow these directions for unpacking: 1. Carefully cut the banding straps and remove them from the box. 2. Cut along the tape line at the top of the box. 3.
  • Page 15 GENERAL TOOL ASSEMBLY This step requires two adults. This 1.5 HP Mobile Dust Cyclone is heavy, be careful when lifting and handling it! Failure to comply may cause serious injury and/or damage to the machine and/or property! Tools Required 10mm wrench / 12mm wrench / 14mm wrench Phillips screwdriver 4mm hex wrench / 5mm hex wrench To assemble your dust cyclone, follow these steps:...
  • Page 16 Step Two: Remove the base which has been fastened to the (3) top upright supports. Step Three: Secure the (4) 3” wheels to the underside of the base using (16) 5/16”*3/4” hex bolts and (16) 5/16”*od18*2T flat washers. 1.5HP Mobile Dust Cyclone Manual...
  • Page 17 Step Four: Turn the base around with it standing on the (4) 4” red wheels and secure the three lower upright support panels using (6) 3/8”*3/4” hex bolts and (6) 3/8”*OD23*2t flat washers. Each lower upright support panel is numbered for its specific location. A –...
  • Page 18 Step Seven: Secure the (3) upright support reinforcement plates using (12) 5/16”*3/4” hex bolts and (12) 5/16”*OD18*2t flat washers. Step Eight: With the help of another person, lift the unit up carefully to the right side up with the motor on top and the wheels at the bottom. 1.5HP Mobile Dust Cyclone Manual...
  • Page 19 Step Nine: Secure the lower triangular support plate to the base using 5/16”*3/4” hex bolts and (4) 5/16”*OD18*2t flat washers..Follow the same steps for the opposite side. Step Ten: Slide the Foot pedal bar into the opening on the lower upright support panel.
  • Page 20 Step Eleven: Secure the foot pedal support to the lower upright support panel using(4) 5/16”*1/2” carriage bolts, (8) 5/16”*OD18*2t flat washers and (4) 5/16” hex nuts. Then secure the foot pedal bar to this support using (4) 5/16”*1-3/4” hex bolts, (8)5/16”*OD18*2t flat washers and (4) 5/16” hex nuts. Follow the same steps for the opposite side.
  • Page 21 Step Thirteen: Attach the two ends of the Octagon foot pedal to the nut on the foot peddle bar Step Fourteen: Secure the topping to the nut on the foot pedal bar. Follow this step on the opposite side. 1.5HP Mobile Dust Cyclone Manual...
  • Page 22 Step Fifteen: Secure the topping with (2) M8*30mm hex bolts Step Sixteen: Align the bolt hole on the movable supporting brace on the foot pedal bar with the bolt hole on the octagon foot pedal. 1.5HP Mobile Dust Cyclone Manual...
  • Page 23 Step Seventeen: Secure the movable supporting brace on the foot peddle bar with the octagon foot peddle using(2) 3/8”*21mm hex bolts. Make sure the bolt head is on the inside of the octagon handle. Adjust the tightness of this bolt accordingly.
  • Page 24 Step Nineteen: Assemble the Octagon drum. Locate the drum base panel, which is stamped, it does not matter which side faces inside, and secure the (4) 3” wheels using (8) 3/8”*OD23*2t flat washers and (4) 3/8” hex nuts.. Use the flat wrench provided to fasten tightly.
  • Page 25 Step Twenty One: The panels have labels R and L on them to show you which panels should be bolted together to prevent any confusion. Please assemble them together per photo below. Step Twenty Two: Both the left and right side lift panels have three bolt holes on them.
  • Page 26 Step Twenty Three: Take the Octagon base panel with wheels and secure on to the bottom of the drum using M4*12mm sheet metal thread bolts. Step Twenty Four: Take the plastic bolt end caps to cover all the bolt ends on the inside of the Octagon drum using (40) plastic end caps.
  • Page 27 Step Twenty Five: Once completing the assembly, apply silicone to the inside of the drum including the base to seal and prevent air leakages. Silicone Step Twenty Six: Attach the handles to the top and bottom end on the front panel with the window display using (4) flat head Philip bolt, (4) 5/16”*OD23*2t flat washers and (4) 5/16”...
  • Page 28 Step Twenty Seven: Attach the rubber gasket to the top inner edges of the Octagon drum. The wider end of the gasket goes up. You will need tin snips to trim any excess rubber gasket after completing the seal. Rubber gasket Step Twenty Eight: Insert the plastic bag inside the Octagon drum.
  • Page 29 Step Twenty Nine: Place the drum insert inside over the plastic bag in the Octagon drum. Drum insert Step Thirty: Lift the foot pedal bar. Align the Octagon drum window to the center point of the drum lid and push the drum in. Lower the foot peddle bar to seal the drum tight for normal machine operation.
  • Page 30 Step Thirty One: Make sure when aligning the drum that both the left and right side lift plates are over the topping on the foot peddle bar assembly before lifting the foot peddle bar up. When not aligned, the drum will not be fully sealed and will interfere with the air flow.
  • Page 31 Step Thirty Three: All the assembly steps have been completed. 1.5HP Mobile Dust Cyclone Manual...

  • Page 32: Maintenance Procedures

    MAINTENANCE PROCEDURES CLEANING THE FILTER To ensure proper operation of this Mobile Dust Cyclone, the HEPA canister filter must have adequate air flow. This means the filter must be regularly maintained by carefully blowing the filter clean using compressed air and an air gun to release built-up particulates trapped between the filter pleats.
  • Page 33 2. While supporting the canister filter assembly from the bottom, release the spring-loaded band clamp from the top of the canister filter assembly. 3. Remove the(4) 3/16”*3/4” sheet metal Philip bolts, (1) 5/16” x 3/4” hex bolt and (1) 5/16” x OD23 x2t flat washer off the bottom of the canister filter.

  • Page 34: Emptying The Drum

    NOTE: You may have to gently bend the paddles in order to free the canister filter. This should not adversely affect the operation of the machine. 5. With the canister filter removed use a compressed air gun to thoroughly clean between the pleats, both inside and outside. RE-ASSEMBLING THE CANISTER FILTER AFTER CLEANING 1.

  • Page 35: Troubleshooting Guide

    TROUBLESHOOTING GUIDE Symptom Possible Cause Possible Solution Machine Power supply switched Ensure power supply is ON and does not OFF or is faulty. has the correct voltage. start or a breaker Wall fuse/circuit breaker is Ensure adequate circuit size; trips. blown/tripped.
  • Page 36 Loud, Machine is on uneven Stabilize on a flat surface. repetitive surface. noise, or excessive Damaged/Unbalanced Inspect impeller for dents, vibration impeller. bends, loose fins. Replace if coming from needed. cyclone Loose connections. Check and re-tighten all fasteners. Replace the motor and Impeller is loose.
  • Page 37 Parts Breakdown 山富機械公司 2016.08.25 出圖章 1.5HP Mobile Dust Cyclone Manual...
  • Page 38 SECTION A 山富機械公司 (Close up view) 2016.08.25 出圖章 1.5HP Mobile Dust Cyclone Manual...
  • Page 39 SECTION B (Close up view) 1.5HP Mobile Dust Cyclone Manual...
  • Page 40 SECTION C (Close up view) 1.5HP Mobile Dust Cyclone Manual...
  • Page 41 SECTION D (Close up view) 1.5HP Mobile Dust Cyclone Manual...
  • Page 42 Part List Ref No Part Name Description Q’TY MOTOR 1.5HP/110V/220V/60Hz/1Phase MOTOR GASKET MOTOR SUPPORT BASE HEX LOCK BOLT 5/16”*5/8” FLAT WASHER 3/8”*OD23*2t HEX BOLT 3/8”*1” HEX NUT 3/8” FLAT WASHER 5/16”*OD18*2t HEX BOLT 5/16”*3/4” SWITCH PLATE HEX BOLT 1/4”*3/4” FLAT WASHER 1/4”*OD19*1t LOCK WASHER 3/8”...
  • Page 43 Ref No Part Name Description Q’TY LOWER UPRIGHT SUPPORT TWO DOT TOP UPRIGHT SUPPORT THREE DOT LOWER UPRIGHT SUPPORT THREE DOT HEX BOLT 5/16”*3/4” FLAT WASHER 5/16”*OD18*2t HEX BOLT 5/16”*3/4” FLAT WASHER 5/16”*OD18*2t HEX NUT 5/16” TOP UPRIGHT SUPPORT ONE DOT LOWER UPRIGHT SUPPORT ONE DOT UPRIGHT SUPPORT...
  • Page 44 Ref No Part Name Description Q’TY HEX BOLT M8*30mm HEX BOLT 3/8”*21mm HEX LOCK NUT 3/8” HEX BOLT 3/8”*1-1/2” HEX LOCK NUT 3/8” TRIANGULAR SUPPORT PLATE 170*102*28 HEX BOLT 5/16”*1-3/4” FLAT WASHER 5/16”*OD18*2t HEX NUT 5/16” LOWER SUPPORT PLATE 30*28*98 PLASTIC BAG 55*95CM BASE...
  • Page 45 Ref No Part Name Description Q’TY HEX NUT 5/16” DRUM CASTER 3”*3/8” FLAT WASHER 3/8”*OD23*2t HEX NUT 3/8” OCTAGON DRUM BACK PANEL OCTAGON DRUM RIGHT PANEL OCTAGON DRUM LEFT PANEL LEFT SIDE PLATE RIGHT SIDE PLATE CARRIAGE BOLT 1/4”*1/2” FLAT WASHER 1/4”*OD19*2t HEX NUT 1/4”...
  • Page 46 Ref No Part Name Description Q’TY OCTAGON DRUM LID HEX BOLT 5/16”*3/4” FLAT WASHER 5/16”*OD18*2t HEX NUT 5/16” PLUG MSP-16 AGL-16 RUBBER GASKET 140CM BAND CLAMP Ø400 SPRING BAND CLAMP Ø400 ROTATION HANDLE HEX LOCK NUT 3/8” FLAT WASHER 3/8”*OD23*2t ROTATION CRANK 210*35*4.5t HEX BOLT...
  • Page 47 Ref No Part Name Description Q’TY ROTATION SHAFT CONNECTION HEX BOLT 5/16”*1-1/2” FLAT WASHER 5/16”*OD18*2t HEX LOCK NUT 5/16” CANISTER FILTER Ø400*611L ROTATION SHAFT BASE SHEET METAL PHILIP BOLT 3/16”*3/4” HEX BOLT 5/16”*3/4” FLAT WASHER 5/16”*OD23*2t FOAM TAPE 3*25mm*1.5M Ø40*60cm PLASTIC BAG INTAKE MANIFOLD Ø6”...
  • Page 48 Laguna Tools is not responsible for errors or omissions. Specifications subject to change. Machines may be shown with optional accessories. © 2017, Laguna Tools, Inc. LAGUNA® and the LAGUNA Logo® are the registered trademarks of Laguna Tools, Inc. All rights reserved.

This manual is also suitable for:

Mdccf15110

Table of Contents