Setting Tool Offsets - laguna Smart Shop M2 Owner's Manual

52 Smart Shop "M" Maker 2 - 3 Phase Power

Setting Tool Offsets

Place the designated tools into the corresponding tool holders on the machine, determined at the time of program
creation.
Change to workpiece 1 and tool 1(Changing Tools Section).
Verify Workpiece 1.
Verify "CurSpindl": Spindle 1, and tool 1 is in the spindle.
Manually jog the spindle into a safe location by the tool rack.
The machine will return to the starting position after changing tools.
Press and hold the "MENU" button --> press "TOOLSET" button -->release both buttons.
Once Tool 2 has touched off, Switch to Tool 3, using the Tool Switch button.
Press and hold the "MENU" button --> press "TOOLSET" button --> release both buttons.
Switch back to Tool 1, using the Tool Switch button. Offsets are now calculated.