Table of Contents
Advertisement
46
Smart Shop "M" Maker 2 - 3 Phase Power
Understanding the Work Coordinate System
Machine Coordinates (Workpiece 0).
Coordinates are based off of the home switches, not the origin.
Tool positions and TTO switch location are set relative to machine coordinates.
Press "MENU + ZRN/0" to switch to "Workpiece 0".
Hold down the MENU + 1-9 Buttons to move between different origin points.(This Machine can have up to 9 Origin
Points on the Handheld at the same time).
In the picture below the Active Work Coordinate System is "Workpiece 2".
Advertisement
Table of Contents
