Chapter 1
Getting Started with the NI 447X
What You Need to Get Started
Related Documentation
NI 447X User Manual
To set up and use the NI 447X devices, you need the following items:
❑
One of the following devices:
–
NI PCI-4472
–
NI PCI-4474
–
NI PXI-4472
–
NI PXI-4472B
❑
NI 447X User Manual
❑
One of the following software packages and documentation:
–
LabVIEW software for Windows
–
Measurement Studio software for Windows
–
A supported application development environment,
such as Visual C++
❑
NI-DAQ driver software and documentation
❑
A PCI-bus computer, or a PXI or CompactPCI chassis and controller
❑
Female SMB connector cables
The following documents contain information that you may find helpful:
•
DAQ Quick Start Guide
•
Field Wiring and Noise Considerations for Analog Signals, available
in the NI Developer Zone at
•
LabVIEW Help
•
NI-DAQ Function Reference Help for NI-DAQ version 6.9.x and
earlier
•
PICMG 2.0 R3.0 CompactPCI specification, available at
www.picmg.org
•
PXI Specification Revision 2.0, available at
•
Traditional NI-DAQ C Reference Help for Traditional NI-DAQ
version 7.0 and later
ni.com/zone
1-2
www.pxisa.org
ni.com