National Instruments NI 447 Series User Manual page 18

Dynamic signal acquisition devices for pci and pxi/compactpci
Table of Contents

Advertisement

Chapter 2
Using the NI 447X
Note
For proper cooling, all covers and filler panels must be installed.
If you are installing more than one NI PXI-4472 device in a PXI or CompactPCI
Note
chassis and want to synchronize DAQ operations between the devices, one NI PXI-4472
must be installed in slot 2. Refer to the
information.
Note
For maximum performance when using a non-PXI chassis, install the NI PXI-4472
in a slot that supports bus arbitration or bus-master modules. The NI PXI-4472 contains
onboard bus-master DMA logic that you can use only if the NI PXI-4472 is installed in
such a slot. NI recommends installing the NI PXI-4472 in such a slot. If you choose a slot
that does not support bus masters, you must disable the onboard DMA controller using
software. A PXI-compliant chassis must have bus arbitration for all slots.
NI 447X User Manual
NI PCI-4472 and NI PCI-4474
1.
Power off and unplug the computer.
2.
Remove the cover.
3.
Make sure there are no lighted LEDs on the motherboard. If any are lit,
wait until they go out before continuing the installation.
4.
Remove the expansion slot cover on the back panel of the computer.
5.
Ground yourself using a grounding strap or by touching a grounded
object. Follow the ESD protection precautions described in the
Unpacking
section of Chapter 1,
6.
Insert the NI PCI-4472 or NI PCI-4474 into a PCI slot. Gently rock the
device to ease it into place. It may be a tight fit, but do not force the
device into place.
7.
Screw the mounting bracket of the NI PCI-4472 or NI PCI-4474 to the
back panel rail of the computer.
8.
Visually verify the installation. Make sure the device is not touching
other devices or components and is fully inserted into the slot.
9.
Replace the cover.
10. Plug in and power on the computer.
The NI PCI-4472 or NI PCI-4474 is now installed.
NI PXI-4472
1.
Power off and unplug the PXI or CompactPCI chassis.
2.
Choose an unused PXI or CompactPCI slot in the system.
Getting Started with the NI
Synchronizing Multiple Devices
2-2
447X.
section for more
ni.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ni pci-4472Ni pci-4474Ni pxi-4472Ni pxi-4472b

Table of Contents